Flow Through the Details of China’s Plastic Injection Molding Process

plastic injection molding

Being adopted for fabricating plastic parts and for a huge range of products, Plastic Injection molding is a common manufacturing process. This method is utilized in manufacturing parts that vary in complexity, size, and application, and in this process, there is the utilization of a machine called an injection molding machine along with a mold and raw plastic. The process includes plastic melting in the molding machine and then injects it into the mold after which it is cooled and solidified into the final product.

Benefits of Injection Molding in China

The major benefit that you get by using a China manufacturer is that when you compare it with the western plastic injection or production you will get more financial savings. When you compare it with other mold makers the cost savings involved in this mold construction is basically around 30% to 50%. One more benefit that you get from Injection Molding China is their fast design production along with quick delivery of the first samples of plastic products.

Few other benefits are like creating larger capacities and the possibility of cheap finishing of products like stamp printing, sublimation techniques, tampo printing, silkscreen, etc. It is quite economical and provides you fast options regarding your manual assembly. It even provides you different packaging options such as cardboard boxes, blistering, or products that are obtained from different companies.

In other benefits, you will find the availability of high efficiency along with easy and simple mass production of plastic parts, complex parts, and their structures, get flexibility in terms of materials as well as colors along with easy engineering of the molding process. In obtaining plastic products this is the most cost-effective way. This is possible because when you compare it to metal machining and other molding processes the cost of resin and the process of manufacturing is very less.

Working of Injection Molding Work

If you want to perfectly control the material flow then injection molds should have a high precision match between the two mold halves. If you want to build a seamless, precision product then the creation of mold is necessary. With the use of steel or aluminum, the construction of injection molds is done

In the case of high volume production, the process of injection molding is highly repeatable and reliable. The second part will become practically identical once there is the production of the first part and the reason behind this is the ability to make multi-cavity injection mold parts, wherewith the help of one cycle multiple parts are made. Few more benefits are minimal loss of scrap, the broad range of material selection, low labor costs.

In injection molding, the major drawback that you will come across is the starting costs of the mold design, which becomes high because of tooling requirements, design, testing, and the longer required lead times. In the process of injection molding, few custom complex parts may come across certain problems such as war pages or surface defects. Hence, you need to design the injection molded parts very carefully considering not having any type of change in geometry as they cool, and to have assurance regarding stability the material selection process should be done perfectly.

Mistakes You Need to Avoid While Making Design for Injection Molding

When Utilization of Draft is not done

From the mold, mold drafts will start facilitating part removal. The draft should be placed at an offset angle so that it becomes parallel to the opening and closing of the mold.

Sharp Corners

In injection molding, stress concentration gets highly increased due to sharp corners, which when gets high can even lead to part failure. A sharp corner usually arises in non-obvious places like a boss attached to a surface, or a strengthening rib.

Non-Uniform Walls

On an average basis, you will find the minimum wall thickness of an injection molded part ranging from 2mm to 4mm (.080 inch to .160 inch). If parts have uniform wall thickness then it will allow the mold cavity to fill more precisely.

In Plastic Injection molding, the thin sections will cool first in case the walls are not uniform. Shrink, stress will start developing between the boundaries of the thin and thick walls when there is cooling and shrinking of thicker sections. The thin section doesn’t respond to the stress as they are already hardened.

China has 3ERP, which is the best rapid prototyping company implementing on three pillars of E i.e. Excellent, Efficient and Economic

Recent Posts
Archives