content

3ERP PEEK Machining Services

PEEK material specification:

PEEK, or polyetheretherketone, a high performance engineering thermoplastic. PEEK grades offer chemical and water resistance similar to PPS (PolyPhenylene Sulfide), but can operate at higher temperatures. PEEK can be used continuously to 480°F (250°C) and in hot water or steam without permanent loss in physical properties. PEEK is a popular thermoplastic used for a wide range of industrial parts and components. It exhibits excellent strength, wear resistance, and abrasion resistance, and retains its properties at high temperatures.

PEEK machining is a difficult, requiring special handling to minimize internal stress and heat-related cracks during machining.
PEEL Material Features:

  • Excellent chemical resistance
  • Very low moisture absorption
  • Inherently good wear and abrasion resistance
  • Unaffected by continuous exposure to hot water or steam

PEEK Machining process:  

CNC Milling, turning and lathing to complete PEEK parts based on different geometry shape and dimension. Like: Plate, bar raw materials.

3ERP offers custom PEEK machining and fabricating for industrial applications. PEEK is a difficult plastic to machine, requiring special handling to minimize internal stress and heat-related cracks during cnc machining.

PEEK MACHINED PARTS

The customized PEEK parts manufactured by 3ERP include:

  • Rollers and wheels
  • Bearings
  • Blocks
  • Bushings
  • Rings
  • Seals
  • Washers

Leave a Reply

XHTML: You can use these